+86-317-8615600+86-19831777981

Blog

Home » Blog
Thin wall die casting parts

Thin Wall Parts Die Casting | Weiheng Metal Products

The die casting is a typical manufacturing process used to produce thin walled components with complex shapes. Thin wall die casting is particularly suitable f……
Sep 8
2023
Partial Squeeze

Partial Squeeze | Advanced Method to Remove Porosity inside Die Casting Parts

Die casting defect usually include air void, shrinkage porosity, gas porosity, which affect airtightness of die casting parts badly. Shrinkage porosity is hard to avoid d……
Mar 28
2023
Decorative chrome plating

Aluminum Die Casting Parts with Decorative Chrome Plating

Decorative chrome plating is always a difficulty for aluminum die casting parts.There are usually some pittings,blisters,missing plating happened onto aluminum die castin……
Jul 22
2022
A360 die casting aluminum parts

Corrosion Resistance Compare between A380 and A360

Both A380 and A360 die casting aluminum alloy belong to Al-Si-Cu Aluminum.Al-Si-Cu alloy feature excellent castability,low shrinkage rate and low hot crack possibility.It……
Jul 21
2022
black anodized die casting parts

Anodized Aluminum Die Casting Parts | Al-Mn-Mg-Zn alloy | Anodizing in different colour

Aluminum alloy featured light weight,good strength and hardness,nice thermal properties.It can be used for many industries.The aesthetic finishing can be excellent after ……
Jun 9
2022
anodizing for die casting

Anodizing Die Casting Parts

Aluminum die casting have some of the most challenging problems in anodizing.Normally,the casting parts can only black anodized. Aluminum die casting parts black anodized……
Feb 11
2022
Tail reducer

Tail Reducer Housing Made from A357 T6

The reducer housing is in 482x446x434mm and 7.0mm wall thickess.The casting have some big and thick stud,which easily cause shrinkage porosity and air pores.The airtightn……
Feb 11
2022
Die Casting Parts Mirror Polishing

Die Casting Parts Mirror Polishing

Many consumption products are in highly demand around the world.So the production capability for these products is very important,otherwise the supply can not meet demand……
Dec 29
2021
Engine Block Cover

Engine Block Cover

The engine block cover is 470x310x105mm.The weight is about 2.4kg and the average thickness is 3.3mm.The thickness area is 26mm.The product is in complex shape and has ma……
Dec 28
2021
Aluminum Motor Housing

Aluminum Motor Housing for E-Automobile

Aluminum motor housing has following features non-uniform wall thickness relatively thin wall in the middle thick wall in the corner complex shape quite a few of holes a……
Dec 27
2021
Telecom Enclosure

Aluminum Telecom Enclosure

Telecom enclosure is aim to protect electronics and components inside.Most of telecommunication company make die casting enclosure for their assembly purpose.We have rich……
Dec 23
2021
Aluminum security camera housing

CCTV Surveillance Camera Aluminum Housing

High quality surveillance camera always equipped with aluminum housing.Therefore,light weight and durable housing is important component for each surveillance camera.Die ……
Dec 23
2021

Latest products

  • die casting motor contro housing with water channel
  • Surveillance Camera Housing
  • die casting motor housing
  • Aluminum Die Casting with Anodizing
  • Aluminum die casting parts
  • window brush parts for automobile
  • Automobile Oil Filter Parts
  • aluminum die casting parts for automobile brake system
  • sheet Metal Fabrication Parts

Free to contact us

    Recent posts

    Brief introduction

    WeiHeng is aluminum casting, sheet metal fabrication manufacturer and supplier. We provide different kinds of aluminum casting service inclusive of high pressure die casting, low pressure die casting, gravity die casting, investment casting and sand casting.
    Email us
    Whatsapp us

      We will answer your email shortly!